Inverted roofing system Firestone EPDM
La merchandise du producteur
Disponible
Précisez un prix auprès du vendeur
- Customer pickup,
- Courier
- En details
Le vendeur
Belgique, Zaventem
(Afficher sur la carte)
(Afficher sur la carte)
+32(
Afficher les numéros de téléphone
Produits d'autres entreprises
Caractéristiques techniques
- Nom de la marqueFirestone
la description
Application
The Firestone EPDM Inverted System is a variation of the conventional Ballasted System. It is ideal for roofs with regular traffic or in severe weather climates. It can be applied on any building that can accommodate the extra load of the ballast and where the roof slope does not exceed 10%.
Benefits Low installation cost Use of large EPDM sheets Fewer seams Fast installation Large choice of compatible substrates Extra durability Flexibility for upgrading of insulation in reroofing projects
Installation EPDM sheets are loose laid over an acceptable substrate. Adjoining sheets are overlapped a minimum of 100 mm and the seams are spliced with Firestone QuickSeam Splice Tape. Once roof perimeters and penetrations are flashed in accordance with Firestone specifications (PDF), a layer of extruded polystyrene and a geotextile are placed over the membrane. The total system is held in place using one of the following materials as ballast:
Gravel in form of round, smooth, river washed aggregate without broken pieces (nominal 16 to 32 mm). Concrete pavers with smooth trowel finish (min. 50 mm thickness). Crushed gravel that must be graduated. Prior to selection of this system, the specifier should evaluate structural conditions of the building to verify its load bearing capacity. Roof slopes and wind requirements should also be investigated.
Benefits Low installation cost Use of large EPDM sheets Fewer seams Fast installation Large choice of compatible substrates Extra durability Flexibility for upgrading of insulation in reroofing projects
Installation EPDM sheets are loose laid over an acceptable substrate. Adjoining sheets are overlapped a minimum of 100 mm and the seams are spliced with Firestone QuickSeam Splice Tape. Once roof perimeters and penetrations are flashed in accordance with Firestone specifications (PDF), a layer of extruded polystyrene and a geotextile are placed over the membrane. The total system is held in place using one of the following materials as ballast:
Gravel in form of round, smooth, river washed aggregate without broken pieces (nominal 16 to 32 mm). Concrete pavers with smooth trowel finish (min. 50 mm thickness). Crushed gravel that must be graduated. Prior to selection of this system, the specifier should evaluate structural conditions of the building to verify its load bearing capacity. Roof slopes and wind requirements should also be investigated.
Contact the seller
Inverted roofing system Firestone EPDM
We recommend to see