Insulation Mantles

For heating and cooling pipes, insulation mantles are used which retain the energy inside the system where it is needed.

• Thanks to their exceptional insulation characteristics, mantles in expanded polystyrene (EPS) are extremely well suited for all kinds of applications (except for steam pipes) from -180° till +90°C. For applications that require higher temperatures, insulation mantles in PIR (till 120°C) or PIR-HT (till 200°C) can be used.
• Insulation mantles can be supplied in all possible diameters and insulation thicknesses. They have a length of 1.2 m and are produced in two or more segments, depending on the diameter. Starting with a side-wall thickness of 30 mm, these mantels are provided with a self-latching tongue and groove connection or with an overlap (for PIR and PIR-HT).
• When the pipes are close to each other, it is possible to insulate them at the same time by using a flat piece between the two segments of the mantel. In that case they are also provided with a self-latching tongue and groove connection.
• To protect the insulation, both against mechanical damage and against the influence of UV rays, the whole thing is finished off with an aluminium sheet of 0.2 mm thickness. This aluminium sheet is supplied in the right circumference length and is provided with edges that are folded over so it can be attached around the insulation mantel without additional accessories.
• With the mantles also belong, of course, curves and elbows in all possible dimensions, with or without aluminium protection. Mantles and accessories can be installed very easily yourself.